Body Beautiful : Use of the device

bb.png

bbb.png

Using the device with the electrodes

This function allows you to use the adhesive electrodes by connecting them directly to the modules.
You can use the device with 1 or 2 modules.

Getting started

  • Connect the modules to the box, observing the colour indicators for each module.
  • Attach the electrodes to the module(s) using the snap fasteners.

    Positioning the electrodes

    • Remove the plastic backing from the electrodes (photo C page 4). Moisten them by spreading a drop of water on the adhesive gel with your fingertips and wait 2 minutes.
    • Position the module(s) on your body

      Note: The electrodes are intended for personal use. For reasons of hygiene, they should only be used by one person.

      Starting the programme
      Turn on your device by following the "Turning on the device" procedure
      The contractions should be firm but never painful. If you feel an unpleasant sensation at the level of the electrodes: reduce the power, move the electrode(s) and gradually increase the power. Also check that the electrodes are sufficiently moistened.
      Once the settings have been optimised, leave the appliance to work for the duration of the programme.

      End of the programme
      When the programme is finished, switch off the device by pressing the «mceclip0.png» button, then unhook the modules.
      Carefully remove the electrodes from your skin.
      Moisten them slightly with a drop of water and carefully place them back on their transparent plastic support.
      Keep the adhesive electrodes in their resealable bag in a cool place (in an insulated compartment of your refrigerator for example).