Body Beautiful : Use with the classic belt

The belt has 2 pairs of press studs on which 2 wireless electrodes specially designed by SPORT-ELEC® are clipped. To obtain new electrodes, contact your usual retailer or order them from our website www.sport-elec.com.

WARNING!
Never use the belt without attaching the 2 electrodes provided.
Never use electrodes other than those supplied by SPORT-ELEC®.

Presentation of the belt

1 = Press studs
2 = Thread cover pocket (with housing bracket)
3 = Hook and loop section

ceinture_1.png

Connecting and positioning the belt

  • Make sure your device is switched off.
  • Unfold the belt.
  • Attach the electrodes to the inside of the belt with the snap fasteners.
  • Attach the 2 modules to the clips on the outside of the belt and connect the cables to the box.
  • Turn on the device and select a programme.
  • Place the belt around your waist and adjust it with the hook and loop fastener so that the electrodes are in contact with the skin.
  • Turn up the power on each channel. Make yourself comfortable and enjoy your electrostimulation session.
  • If you feel a tingling sensation, stop the device and check that the electrode is in contact with the skin. If the problem persists, contact the After Sales Service.

End of programme

When the programme is finished, switch off the device and disconnect the device from the belt.
Detach the electrodes and moisten them slightly with a drop of water before replacing them on their transparent plastic supports.