FarmaDolor : Safety in use

FarmaDolor : Safety in use

• The electrode should be finger coated with a little water before being placed on the body.

• The electrode must be perfectly connected to the 2 connectors of the box.

• It is possible to repeat the programme cycle on another muscle area.

• The device must be used completely, with all detachable parts in place (particularly the battery cover).

• If the device detects a fault on start-up, the 3 indicator lights (1, 2 and 3) will flash. In this case, change your batteries. If the problem persists, contact your dealer.

• FarmaDolor requires special precautions regarding EMC and must be installed and operated according to the EMC information provided in this document. Portable and mobile RF communication devices can affect medical electrical equipment. This device should not be used next to or stacked with other devices.

ATTENTION: FarmaDolor is equipped with a safety system that stops the programme if the electrode is no longer in contact with the skin (after 10 consecutive seconds of no contact, the device switches off automatically). Be careful not to touch the electrode with your fingers during these 10 seconds.

If this absence of contact does not exceed 10 seconds, the programme continues normally.