Using the device with the multi-position accessory

The Ultramax belt has a slot where the multi-position accessory is clipped.
Caution! Never use accessories other than those supplied by SPORT-ELEC®.
To obtain new accessories, contact your usual retailer or order them from our website www.sport-elec.com.

1. Connection and positioning of the belt

• Make sure your device is turned off.
• Unfold the belt.
• On the back side of the belt, place the accessory with snaps through the belt holes.
• On the front side, place the device and connect it to the accessory through the belt with snaps.
• Stretch the plastic support of the electrodes.
• Moisten it by spreading a drop of water on the adhesive gel with your fingertips and wait 2 minutes.

    Nb: The electrodes are intended for personal use. For reasons of hygiene, it should be used by one person only.

• Place the two electrodes of the multi-position accessory on the parts of the body to be worked on.

    If you feel a tingling sensation, turn off the unit and check that the electrode is in contact with the skin. If the problem persists, contact the Service Department.

2. Starting the program with the belt

Once you have connected your device, sit back and turn on your device by following the "Turning on the device" procedure.

You can carry out your usual activities while the device is in use.

3. End of program

• When the program is finished, turn off the unit and unplug the unit from the accessory.
• Remove it from the belt.
• Detach the electrodes and moisten them slightly with a few drops of water before replacing them on their transparent plastic support.